|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Description:
The SGC-200W Dual-Channel system targets filmmakers, vloggers and journalists who need two wireless audio sources at once. It mounts neatly on top of a camera and connects to DSLRs, mirrorless bodies or phones.The SGC-200W Dual-Channel is designed for video recording, interviews and content creation where two wireless microphones are required at the same time. Conveniently installed on the camera and connected to DSLRs, mirrorless cameras or smartphones. Takstar SGC-200W is a wireless radio system with a lapel microphone, designed for professional use in interviews, filming, blogs and live broadcasts. It works in the range of 470–960 MHz and provides stable signal transmission at a distance of up to 80 meters in open space. The omnidirectional condenser microphone captures the voice from different sides, preserving the natural sound and allowing you to move freely during recording. The frequency range of 20-18000 Hz provides clear, detailed sound, and the built-in low-pass filter helps to cut off hum and noise. The system supports up to 50 working channels, automatic frequency selection, real-time sound monitoring and independent volume control. Takstar SGC‑200W combines convenience, quality and versatility — an excellent solution for field tasks, video production and live content.
Specification:
• Type: two-channel wireless on-camera microphone system
• Purpose: interviews, vlogs, reports, content for social networks
• Wireless communication: UHF with high noise immunity
• Working distance: up to several tens of meters in open space • Functions: real-time monitoring, signal level adjustment
Frequency range: 470~960 MHz
Number of channels: two
Number of frequency bands: 50 frequency bands
FM width: 30 MHz
Frequency band interval: 600 kHz
Modulation: FM
Frequency response: 20 Hz ~ 18 kHz
Frequency stability: 0.015%
Signal/noise ratio: >=92 dB A+ (line output)
Residual noise: >=-100 dB A+ (line output)
Transmitter:
Microphone input: 3.5 mm
Power source: 2 AA batteries
Power: <=10 mW
Low cut: 200 Hz, 5 dB/oct.
Operating time: about 10 hours (depending on battery capacity)
Dimensions: 90x65x25 mm
Weight: about 83 g
Receiver:
Built-in power supply: 2 AA batteries
External power supply: Type-C connector
Antenna connector: SMA/50 ohm impedance
Sensitivity: <=-80 dBm
Audio output: 3.5 mm line out + 3.5 mm headphone out
Headphone output power: 25 mW (RMS) @ 32 ohm
Operating time: about 10 hours (mono)
(depending on battery capacity)
Dimensions: 90x65x25 mm
Weight: 96 g
Product Contents:
• Takstar SGC-200W dual-channel receiver
• Two transmitters with microphones (often lavaliers)
• Connection cables for cameras/phones
• Camera hot-shoe mount or clip
• Batteries or rechargeable cells (depending on kit), user manual
Features:
• Two wireless channels for flexible recording setups
• UHF technology for stable, low-noise transmission
• Real-time headphone monitoring of the audio signal
• Compatible with cameras, recorders and smartphones (with adapters)
• Ideal for interviews, dual-presenter videos and location shoots

Takstar SGC-200W Dual-Channel — UHF Wireless Camera Microphone System for Interviews and Video Production
Takstar SGC-200W Dual-Channel is a two-channel UHF wireless microphone system designed for DSLR and mirrorless cameras, video cameras, audio recorders and compatible mobile devices.
It enables two people to be recorded simultaneously without long microphone cables, making it a practical audio solution for interviews, documentary filming, video podcasts, educational content and corporate video production.
The dual-channel package includes one receiver, two bodypack transmitters and two omnidirectional condenser lavalier microphones.
Two Independent Audio Channels for Greater Editing Flexibility
One of the most useful features of the SGC-200W Dual-Channel is its ability to handle two audio sources simultaneously.
During an interview, one lavalier microphone can be attached to the presenter while the other captures the guest. The system supports independent A/B channel output as well as combined output.
When used with a compatible recording device, separate channels allow the editor to adjust the voices individually during post-production. This is particularly valuable when speakers have different voice levels or move independently.
The combined output option provides additional flexibility for different recording workflows.
Practical Applications
Journalism and field interviews. Wireless lavalier microphones let presenters and interviewees move more naturally. Placing the microphones close to each speaker helps capture intelligible dialogue while the camera operator changes framing or position.
Video blogging and social media production. The dual-transmitter setup works well for product reviews, collaborative presentations, tutorials and conversational videos involving two participants.
Corporate video production. Companies can use the system to record staff interviews, expert commentary, equipment demonstrations, training sessions and promotional videos.
Video podcasts. Independent audio channels help editors balance two speakers, improving flexibility during dialogue editing and sound processing.
Education and training. The system is suitable for recorded lessons, demonstrations, workshops and instructional videos where two speakers need individual microphones.
Documentary and location filming. AA battery operation makes the system practical for shoots away from permanent power sources. Spare batteries can be prepared in advance for extended sessions.
UHF Wireless Transmission and Real-Time Monitoring
The Takstar SGC-200W uses UHF wireless transmission with selectable frequency settings. The dual-channel version provides 25 frequency settings for each A/B channel. The actual operating frequency band depends on the specific regional hardware version.
Under favorable open-area conditions, the wireless operating distance can reach approximately 80 m. Actual range may vary with obstacles, antenna positioning and local radio interference.
The receiver features a 3.5 mm audio output and a dedicated 3.5 mm headphone output for real-time monitoring.
Monitoring helps camera operators detect unwanted noise, microphone placement issues and unsuitable recording levels before they affect an entire take.
Recording-level and headphone-monitoring adjustments allow the system to be adapted to different production environments.
A low-cut filter helps reduce unwanted low-frequency rumble. The included windscreens can also help when recording outdoors, although strong wind may still require additional precautions.
Main Technical Features
- System type: dual-channel UHF wireless microphone system.
- Configuration: two bodypack transmitters and one dual-channel receiver.
- Microphones: two omnidirectional condenser lavalier microphones.
- Frequency response: 20 Hz–18 kHz.
- Frequency settings: 25 per A/B channel.
- Wireless range: approximately up to 80 m in favorable open conditions.
- Transmitter microphone input: 3.5 mm.
- Receiver outputs: 3.5 mm line output and 3.5 mm headphone output.
- Receiver external power connection: USB Type-C.
- Transmitter power supply: 2 AA batteries per unit.
- Receiver power supply: 2 AA batteries.
- Approximate transmitter runtime: 10 hours.
- Approximate receiver runtime in dual-channel mode: 8 hours.
- Functions: independent and combined channel output, headphone monitoring, level adjustment and low-cut filtering.
Battery life depends on battery capacity and operating conditions.
Camera, Recorder and Smartphone Connectivity
The receiver connects to compatible recording equipment through an appropriate audio cable and external audio input.
The standard package includes a 3.5 mm audio cable, a 3.5 mm-to-XLR audio cable and a mobile-device conversion cable.
Before connecting a specific camera or smartphone, users should verify its external audio input, connector type and adapter requirements. Some mobile devices may require additional compatible adapters.
Why Choose the Takstar SGC-200W Dual-Channel?
Compared with a single-channel wireless microphone system, the dual-channel configuration provides a more convenient workflow for interviews and conversations involving two people.
Separate channel output, headphone monitoring and adjustable recording levels help users maintain better control of dialogue recording.
Replaceable AA batteries also make the system useful for field production, educational filming and corporate media projects where reliable power planning is important.
Takstar Direct Importer in Ukraine — ClubTech Wholesale and Dealer Cooperation
ClubTech is a direct importer of Takstar products in Ukraine, supplying wireless microphone systems, recording equipment and professional audio solutions for retail customers, businesses and professional users.
We offer wholesale Takstar supplies and welcome new dealers, musical equipment retailers, audio installation companies, system integrators, video production studios, rental businesses and independent entrepreneurs.
Special wholesale and partnership terms may be available to dealers and long-term business customers.
ClubTech welcomes new clients and partners interested in distributing, installing and supplying professional sound equipment throughout Ukraine.